Deity V-Mic D3 Pro Shotgun Microphone


  • Sound Field : Mono
  • Polar Pattern : Supercardioid
  • Windscreen : Foam (Included)
  • Output Connectors : 1 x1/8″ / 3.5 mm TRRS Female (on Mic)
  • Bus Power : None
  • Battery Type : 1 x Built-In (Included)
  • Warranty : Deity India 2 Years Warranty

Out of stock

Notify me when the item is back in stock.

Free Shipping All Over India

  • Genuine Products & Fast Support
  • Trusted Camera Store For More Than 20 Years
  • Normally delivery takes 1 – 7 days
Guaranteed Safe Checkout

Deity V-Mic D3 Pro Shotgun Microphone

In The Box

  • V-Mic D3 Pro Shotgun Microphone
  • Rycote Lyre Adjustable Shoe Shockmount
  • Smart 3.5mm TRRS Coiled Cable
  • USB Charging Cable
  • Foam Windscreen


  • You Should Know
    Some TRS-equipped cameras from Blackmagic, Fuji, and Olympus require a 3.5mm TRS cable (available separately) for operational compatibility. Plug-in power (bias voltage) is required to turn on the V-Mic D3 Pro.
  • Auto-Configuring 3.5mm Connector
    The V-Mic D3 Pro incorporates a microprocessor that automatically adapts its 3.5mm TRRS connector to work with most 3.5mm microphone jacks. Out of the box, the V-Mic D3 Pro is compatible with many DSLRs, camcorders, smartphones and tablets (late-model iOS devices require Apple’s Lightning to 3.5mm headphone jack adapter), portable audio recorders, bodypack transmitters, and laptops. Visit the Deity Microphones website to see a comprehensive list of compatible devices.
  • Stepless Gain Knob
    The V-Mic D3 Pro features a stepless analog gain dial. Integrated bump guards help prevent the dial from being accidentally rotated. The gain (up to 20 dB) is added on a linear scale, so you can dial in the exact amount of boost you need for the shot.
  • Selectable Low-Cut Filtering
    Attenuate low-frequency rumble with the V-Mic D3 Pro’s low-cut filter, selectable at 75 Hz or 150 Hz. Rather than using a sunken switch that requires a pointed object to flip, the V-Mic D3 Pro opts for a single top-mounted button.
  • Low Off-Axis Coloration
    The V-Mic D3 Pro’s pickup pattern remains similar across essential frequencies, yielding low off-axis coloration. Novice and experienced videographers can capture consistent audio quality when dealing with sources that vary their positions.
  • Low-Noise Electronics
    Thanks to the 14mm condenser capsule and low-noise, low-distortion electronics, the V-Mic D3 Pro provides clean audio with a high signal-to-noise ratio, which means less time spent in post-production processing your tracks with noise-reduction software.
  • Long Battery Life
    The V-Mic D3 Pro uses a built-in 320mAh lithium battery, which powers the mic for up to 51 hours. Plug-in power is only used to wake the mic from its standby mode. The internal battery recharges via USB in approximately two hours.
    Automatic power saving conserves battery life by entering standby mode when your camera or device is turned off. The power switch and power LED indicate aid in power management; the LED will be red when power is low.
  • Convenient Accessories
    The Rycote Lyre shockmount supports attachment to a camera shoe mount, boompole, or tripod, and it minimizes the transfer of vibrations by decoupling the mic from your camera or stand. The included foam windscreen reduces noise from HVAC systems and light wind. For enhanced protection against wind noise in outdoor shoots, use a windjammer such as the Rycote 12cm Classic-Softie windshield (available separately).


Primary Applications : Audio for Video, Location Sound
Form Factor : Stand/Boom Mount
Intended Sound Sources : Vocals, Room Ambiance
Sound Field : Mono
Operating Principle : Pressure Gradient
Capsule : Condenser
Diaphragm : 0.55" / 14 mm
Polar Pattern : Supercardioid
Orientation : End Address
Circuitry : Solid-State
Pad : None
High-Pass Filter
75 Hz
150 Hz
Tone Adjustment : None
Gain Adjustment : Up to +20 dB
Indicators : Single LED (Power, Status)
On-Board Controls : Gain/Sensitivity, High-Pass Filter, On/Off
Windscreen : Foam (Included)

Frequency Range : 50 Hz to 20 kHz
Maximum SPL : 130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
3 dB at 60°
10 dB at 120°
15 dB at 180°
Impedance : 200 Ohms
Sensitivity : -24 dBV/Pa at 1 kHz
Dynamic Range : 114 dB
Signal-to-Noise Ratio : 84 dB
THD : < 0.1%

Output Connectors (Analog) : 1 x 1/8" / 3.5 mm TRRS Female (on Mic)
Headphone Connector : None

Bus Power : None
Operating Voltage : Not Specified by Manufacturer
Operating Current Consumption : 6.3 mA (Battery Power)
Battery Type : 1 x Built-In (Included)
Battery Chemistry : Lithium-Ion
Battery Capacity : 320 mAh
Approximate Battery Life : 51 Hours

Color : Black
Mounting : 1/4"-20 Female, 3/8"-16 Female, Camera/Shoe-Mount, Shockmount (with Included Hardware)
Included Case : None
Included Filters : None
Construction Material : Aluminum
Storage Temperature : 14 to 102°F / -10 to 70°C
Certificatibons : CE, RoHS, as per Manufacturer
Dimensions : ø: 0.83 x L: 7.44" / ø: 21 x L: 189 mm
2.75 oz / 78 g (Microphone)
5.04 oz / 143 g (with Mount)

Ask Your Query