Rode VideoMic GO Microphone Online Buy Mumbai India 1
Rode VideoMic GO Microphone (Open Box)
8,400 4,450 Add to cart

Rode VideoMic GO Microphone (Open Box)


  • Non Returnable
  • Unused Product
  • Sound Field : Mono
  • Polar Pattern : Supercardioid
  • Windscreen : Foam (Included)
  • Output Connectors : 1 x 1/8″ / 3.5 mm TRS

In stock

Free Shipping All Over India

  • Genuine Products & Fast Support
  • Trusted Camera Store For More Than 20 Years
  • Normally Delivery Takes 1 – 7 days
  • For More Queries Check – Customer Help
Guaranteed Safe Checkout

Rode VideoMic GO Microphone (Open Box)

In The Box

  • VideoMic GO Microphone
  • Coiled 3.5mm TRS Cable


  • Shotgun Mic with Directional Sound Pickup
    Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
  • Easy Hookup to Camera
    A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
  • Runs on Plug-In Power
    No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.
  • Integrated Shockmount Inhibits Vibrations
    Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).
  • Windscreen Minimizes Wind Noise
    The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).
  • Connectivity Options
    Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.


Form Factor : Stand/Boom Mount
Sound Field : Mono
Operating Principle : Line Gradient
Capsule : Electret Condenser
Diaphragm : 0.5" / 12.70 mm
Polar Pattern : Supercardioid
Orientation : End Address
Circuitry : Solid-State (JFET)
Pad : None
High-Pass Filter : None
Tone Adjustment : None
Indicators : None
On-Board Controls : None
Windscreen : Foam (Included)

Frequency Range : 100 Hz to 16 kHz
Maximum SPL : 120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
4 dB at 60°
16 dB at 120°
12 dB at 180°
Sensitivity : -35 dBV/Pa at 1 kHz
Dynamic Range : 96 dB
Signal-to-Noise Ratio : 60 dB A-Weighted
Equivalent Noise Level : 34 dB A-Weighted

Output Connectors (Analog) : 1 x 1/8" / 3.5 mm TRS
Cable Length : 7.87 to 13.78" / 20 to 35 cm
Number of Conductors : 2
Wireless Connectivity : None

Operating Voltage : 2.5 V
Operating Current Consumption : 330 µA (Plug-In Power)

Color : Black
Mounting : 3/8"-16 Female, Camera/Shoe-Mount, Shockmount (with Included Hardware)
Construction Material : ABS
Dimensions : ø: 3.11 x L: 6.57" / ø: 79 x L: 167 mm
Weight : 2.58 oz / 73 g

Ask Your Query