Saramonic SR-AX107 2-Channel XLR Audio Adapter with Isolation Transformer for DSLRs
13,990 9,990 Add to cart
Sale!

Saramonic SR-AX107 2-Channel XLR Audio Adapter with Isolation Transformer for DSLRs

13,990 9,990

-29%
  • 2x Balanced XLR Inputs
  • 12V/48V/Off Phantom Power Switch
  • LED Metering
  • Requires 9V Battery
  • Connect Mics and Wireless Microphones
  • Connect Digital Recorders and Mixers

In stock

Free Shipping All Over India

  • Genuine Products & Fast Supports
  • Place your order before 2.30pm for same day dispatch (Most products not all)
  • Save 1.8% by paying via Net Banking or UPI (on Request)
Guaranteed Safe Checkout

Description

Saramonic SR-AX107 2-Channel XLR Audio Adapter with Isolation Transformer for DSLRs

Inputs:

Two balanced XLR inputs
One monitor input jacks

Output:

One stereo 1/8″ (3.5 mm) mini-jack output

Control Knobs:

Left and Right control knobs allows you to adjust the signal of each channel to the optimum recording levels

Volume Control knob adjusts the headphone volume level

M/S Switch:

Select mono or stereo output mode

LINE / MIC/ PH Switches:

Select LINE, MIC or Phantom levels

PH 12V/OFF/48V Switch:

Optional off, 12 or 48 volt phantom power for condenser microphones that require phantom power to operate

Level Meter:

Indicates the sound level in dB for each channel

LED indicators:

The LED signal indicators flash red for overload

Gain Switch:

Selects LOW for unity gain or HIGH for +20dB boost in sound level

MONITOR:

Headphone jack to monitor the audio from microphones or camera

AGC ON/OFF Switch:

Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments

Isolation Transformer:

Provides a completely noise free and pure sound

GND1/GND2:

Dual-mode grounding switch

Dual Headphone Jacks:

Feature isolated volume controls to allow you to monitor the audio from the adapter at the input and output points

Specifications

Maximum Input Levels : MIC 0 dB on the Level meter at -44 dBu input

LINE 0 dB on the Level meter at +10 dBu input

Output Level : Nominal MIC levels

Frequency Response : 20 Hz to 20 kHz (+/- 0.5 dB)

THD : Less than 0.01% @ 1kHz, -30dBu input

S/N Ratio : 85 dB @ 1 Khz, -30 dBu input

Gain:

LO gain : 0 dB

HI gain : 20 dB

Phantom Power : Dual regulated 12 or 48 volt power supplies

Current to 14 mA (direct short)

Level meter : -18 to +3 dB in 3 dB increments

Battery Type : One 9 volt alkaline or lithium battery

Battery Duration: 3 hours typical with alkaline battery (no phantom)

8 hours typical with lithium battery (no phantom)

Dimensions: (L x W x H) 155 mm x 98 mm x 64 mm

Weight : 21.1 oz (0.599 kg)

Ask Your Query