Sale!

Sennheiser MKE 200 Microphone

8,099

-5%
  • Sound Field : Mono
  • Polar Pattern : Supercardioid
  • Windscreen : Built-In Windsock/Windjammer (Included)
  • Output Connectors : 1 x 1/8″ / 3.5 mm TRS Female (Locking, on Mic), 1 x 1/8″ / 3.5 mm TRS Male (on Detachable Cable), 1 x 1/8″ / 3.5 mm TRRS Male (on Detachable Cable)
  • Warranty : Sennheiser India 1 Year Warranty

Out of stock

Notify me when the item is back in stock.

Free Shipping All Over India

  • Genuine Products & Fast Support
  • Trusted Camera Store For More Than 20 Years
  • Normally delivery takes 1 – 7 days
Guaranteed Safe Checkout

Sennheiser MKE 200 Microphone

In The Box

  • MKE 200 Microphone
  • 3.5mm Locking TRS to 3.5mm TRS Coiled Cable
  • 3.5mm Locking TRS to 3.5mm TRRS Coiled Cable
  • MZH 200 Furry Windshield
  • Drawstring Pouch

Features

  • Ultracompact and Ultralightweight
    Measuring just 2.7″ long and weighing only 1.7 ounces, the MKE 200 is an unobtrusive companion for your camera- or smartphone-based video rig; it will never intrude on the shot and it’s so light that you’ll forget it’s even there. Also, the integral shoe mount allows the MKE 200 to be attached directly to your camera, no external hardware required.
  • Directional Sound Pickup
    Most built-in camera and smartphone microphones are omnidirectional to pick up sound from all directions, which results in undue noise and ambience. The MKE 200 uses a supercardioid polar pattern to capture sources in front of the mic while attenuating side- and rear-entry sound. Low-noise electronics and a sensitive condenser element allow it to deliver more detailed audio than the mics typically found in cameras, mobile devices, and portable recorders.
  • Quick and Secure Hookup to Camera, Smartphone, or Tablet
    The MKE 200’s 3.5mm output port can be connected to a range of devices using the two supplied coiled cables, each featuring a locking 3.5mm TRS plug on one end that prevents accidental disconnection at the mic.
    One cable is terminated with a standard 3.5mm TRS plug for compatible hookup to your camera, DSLR, or portable handheld audio recorder, while the other cable has a 3.5mm TRRS plug to allow direct connection to mobile devices such as smartphones and tablets.
  • No Batteries Required
    Since the MKE 200 operates on plug-in power (2 to 10V), no batteries are required to run the microphone. Just hook up the MKE 200 to your camera or mobile device and forget about having to check, swap, or charge batteries.
  • Internal Suspension Mount Minimizes Handling Noise
    The MKE 200 incorporates an internal suspension mount to reject the transfer of vibrations such as camera/smartphone handling noise. Plus, the bottom of the MKE 200 features a camera shoe mount, ensuring simple attachment to your camera or shoe-equipped stand or gimbal.
  • Built-In Wind Protection Minimizes Wind Noise
    Knowing that the MKE 200 may be used in challenging shooting conditions, Sennheiser designed the MKE 200 with built-in wind protection, enabling the mic to lessen undesirable wind noise from breezes, fans, heaters, and air conditioners without requiring that you slip on a separate foam windscreen. For maximum reduction of wind noise in outdoor environments, use the included furry windshield.

Specifications

  • Microphone
    Form Factor : Camera-Mount
    Sound Field : Mono
    Operating Principle : Pressure Gradient
    Capsule : 1 x Electret Condenser
    Polar Pattern : Supercardioid
    Orientation : End Address
    Circuitry : Solid-State
    Pad : None
    High-Pass Filter : None
    Tone Adjustment : None
    Indicators : None
    On-Board Controls : None
    Windscreen : Built-In
    Windsock/Windjammer (Included)
  • Performance
    Frequency Range : 40 Hz to 20 kHz
    Maximum SPL : 120 dB SPL (1 kHz)
    Off-Axis Rejection
    3 dB at 60°
    18 dB at 120°
    14 dB at 180°
    Sensitivity : -33 dBV/Pa at 1 kHz
    Equivalent Noise Level : 20 dB SPL A-Weighted
  • Connectivity
    Output Connectors (Analog)
    1 x 1/8" / 3.5 mm TRS Female (Locking, on Mic)
    1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable)
    1 x 1/8" / 3.5 mm TRRS Male (on Detachable Cable)
    Headphone Connector : None
  • Power
    Operating Voltage : 2 to 10 V (Plug-In Power)
  • Physical
    Color : Black
    Mounting : Camera/Shoe-Mount (via Integrated Hardware)
    Dimensions : H: 2.36 x W: 1.54 x L: 2.72" / H: 60 x W: 39 x L: 69 mm
    Weight : 1.69 oz / 48 g

Ask Your Query