Sennheiser MKE 600 Shotgun Microphone


  • Form Factor :  Stand/Boom Mount
  • Sound Field : Mono
  • Polar Pattern : Lobar, Supercardioid
  • Windscreen : Foam (Included)
  • Output Connectors : 1 x XLR 3-Pin Male (on Mic)
    1 x 1/8″ / 3.5 mm TRS Male (on Detachable Cable)
  • Warranty : Sennheiser India 1 Year Warranty

Out of stock

Notify me when the item is back in stock.

Free Shipping All Over India

  • Genuine Products & Fast Support
  • Trusted Camera Store For More Than 20 Years
  • Normally Delivery Takes 1 – 7 days
  • For More Queries Check – Customer Help
Guaranteed Safe Checkout

Sennheiser MKE 600 Shotgun Microphone

In The Box

  • MKE 600 shotgun microphone
  • MZS 600 shock mount
  • MZW 600 foam windshield
  • Instruction manual
  • KA 600 XLR to 3.5mm TRS cable
  • Pouch


  • Quality Sound
    The 10″ long MKE 600 uses an interference tube and a supercardioid/lobar polar pattern to provide pronounced directivity on-axis along with significant attenuation of sound entering at the sides and rear, making the MKE 600 far more effective at capturing distant sources than the omnidirectional mics found in most cameras.
  • Bass Roll-Off
    The MKE 600 naturally reduces sub-bass frequencies below 40 Hz to prevent unnatural bass buildup. Activate the switchable low-cut filter at 100 Hz to roll off more low-frequency noise from common sources such as air conditioners and traffic.
  • Battery or Phantom Powered
    Thanks to its 3-pin XLR output and compliance with 48 VDC phantom powering, the MKE 600 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
    When using devices that don’t offer phantom power, the MKE 600 may be powered for up to 150 hours by a single AA battery (included). Approximately 8 hours of operating time remain once the low-battery indicator lights up red. Use the on/off switch to prevent unnecessary battery drain.
  • Ideal for Camera, Tripod, or Boompole Mounting
    The MKE 600 includes a shoe shockmount for easy placement on your camera or a tripod. To mount the MKE 600 on a boompole or mic stand, use the Rycote InVision INV-HG mkIII shockmount (available separately), which will also impede the transfer of vibrations between your boompole/stand and the mic.
  • XLR to 3.5mm TRS Adapter Cable for Cameras
    Included with a MKE 600 is a short coiled adapter cable—XLR female to 3.5mm TRS male—that lets you connect the mic directly into a mini-jack mic input on a camera.
  • Windscreen Minimizes Wind Noise
    The MKE 600 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners by up to 25 dB. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 15cm Super-Softie, which also provides high immunity to rain.
    For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider a complete windjammer, windshield, and shockmount suspension system such as the Rycote Super-Blimp NTG or the large Rycote Super-Shield Kit (both available separately).


  • Microphone
    Primary Applications : Audio for Video, Location Sound
    Form Factor : Stand/Boom Mount
    Intended Sound Sources : Speech/Voice Over
    Sound Field : Mono
    Operating Principle : Line Gradient
    Capsule : Condenser
    Polar Pattern : Lobar, Supercardioid
    Orientation : End Address
    Circuitry : Solid-State
    Pad : None
    High-Pass Filter : 100 Hz
    Tone Adjustment : None
    Gain Adjustment : None
    Indicators : 1 x Red Single LED (Battery)
    On-Board Controls : High-Pass Filter, On/Off
    Windscreen : Foam (Included)
  • Performance
    Frequency Range : 40 Hz to 20 kHz
    Maximum SPL : 132 dB SPL (Phantom Power)
    126 dB SPL (Battery Power)
    Off-Axis Rejection : 5 dB at 60°
    >15 dB at 120°
    >10 dB at 180°
    Sensitivity : 21 mV/Pa (Phantom Power)
    19 mV/Pa (Battery Power)
    Equivalent Noise Level : 15 dB A-Weighted (Phantom Power)
    16 dB A-Weighted (Battery Power)
  • Connectivity
    Output Connectors (Analog) : 1 x XLR 3-Pin Male (on Mic)
    1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable)
    Headphone Connector : None
  • Power
    Bus Power : None
    Operating Voltage : 48 V ± 4 V (Phantom Power)
    Operating Current Consumption : 4.4 mA (Phantom Power)
    Battery Type : 1 x AA (Included)
    Approximate Battery Life : 150 Hours
  • Physical
    Color : Black
    Mounting : Camera/Shoe-Mount (with Included Hardware)
    Included Case : Pouch
    Included Filters : None
    Construction Material : Metal
    Operating Temperature : 14 to 140°F / -10 to 60°C
    Dimensions : ø: 0.79 x L: 10.08" / ø: 20 x L: 256 mm
    Weight : 4.52 oz / 128 g (Microphone)

Ask Your Query